Gps time clock
Enviro Technologies offers GPS-based solutions for precise & uniform timekeeping within a facility whether a manufacturing unit or a critical laboratory. Within the range of GPS-based clocks, we also offer wireless & wired solutions for time synchronization. Taking the time signal from GPS satellites, the GPS master device transmits this over a wireless/wired link to all the slave clocks in range. These clocks may be used as accurate stand-alone time displays. They can also be synchronized so that all clocks display the same time.
CE Certified
BIS Certified
Make in India
Description
- The device synchronizes with up to Seconds by GPS, NT Server, or master clock.
- 12/24 Hrs Time Format and can be set with a short slide switch.
- Synchronizes from internal RTC in case of network failure and battery backup in case of power failure.
- Ethernet network compatibility to integrate existing wired network and support RS485 communication.
- Accurate RTC clock with 2.3”& 4.0” super bright seven-segment Red LED display.
- Synchronizes with Universal time (through server or GPS device ).
- Master clock synchronization for slave devices and synchronization with PC for LAN devices.
Technical Information
|
Parameter |
Description |
|---|---|
|
Display |
2.3 inch / 4.0 inch LED 7 segment display. |
|
Model |
1: HH:MM; 2: HH:MM:SS; 3: HH:MM DD:MM:YY 4: HH:MM:SS DD:MM:YY |
|
Accuracy |
±1 seconds with respect to UTC/www.india-time.com or Synchronize to GPS as per model with accuracy should be ± 1 second. |
|
Indication |
AM/PM LED Indication |
|
Communication |
Ethernet / RS-485 Master Slave / GPS Master with slave (RS485 base) / GPS Master with slave Ethernet. Compatibility with MODBUS clock. (Required all register mapping) |
|
Controller |
Power of ARM 32 bit controller |
|
Time Format |
24 Hrs Modes and 12 Hrs Mode. (Settable through Slide switch and protocol command and through menu as well). |
|
Synchronization Mode |
NT Server / GPS master clock / Ethernet Master clock / RS |
|
Environmental Ratings |
0 - 50° C |
|
Mechanical |
2.3inch display (315mm X 110mm X 45mm) Wall Mount 2.3inch display (355mm X 110mm X 45mm) Flush Mount |
|
Mounting |
2.3 inch digit wall mount 4 inch digit wall mount |
|
Enclosure Material |
Back box MS powder coated OR SS304 material front plate (As Per order) |
|
Operating Voltage |
220VAC, 50 Hz 30 W / POE / 12VDC 1Amp |
Wireless Digital Clocks Specifications
|
Power Supply |
230V 50Hz |
|
Time Source |
GPS Sync with time keeping Internal RTC |
|
Communication interface |
RF Wireless/RS485 |
|
LED Indication |
AM/PM |
|
Display Size |
2.3” |
|
Material |
SS-304 |
|
Protection |
Ip20 |
|
Mounting |
Wall & Flush Mount |
|
GPS Antenna |
External 3 Meter |
